QAP FOR CS TANK FABRICATION & ERECTION

COMPANY NAME						REPORT  NO:
		QUALITY ASSURANCE PLAN FOR				DATE:
		TANKS.				SHEET :  1  OF  1
JOB NO :			CLIENT :
PROJECT :			CONTRACTOR :
ACCEPTED. STD  -    APPLICABLE SPECS.
Sr. No.	Inspection Activity	Reference	Characteristic	Acceptance	Inspection Agency
		Document	verified	criteria	CONTRACTOR	CLIENT	REMARKS.
1	RECEIPT INSPECTION
i	Visual Inspection	Inspection Report	Damage	No Defects	W	R
ii	Document Review	Material T.C.	Correlation of	Specs.	W	R
			Product with T.C.
2	WELDING PRE-REQUISITES
i	Inspection of  Consumbles (as applicable)	ASME Sec.-II, part-c	Correlation with T.C.	Mfr. Std.	W	R
ii	WPS/PQR	ASME Sec.-IX	Tensile/Bend	ASME Sec.-IX	W	W
iii	WPQT (Welder Qualification)	ASME Sec.-IX	RT	ASME Sec.-IX	W	W
3	TANK FABRICATION/INSTALLATION
i	Set ups	WPS	Joint Configuration	WPS	W	R
ii	Welding Control	Electrode Specs.	Backing Time/Temp.	WPS	W	R
		Specs.	Preheat/Interpass	Specs.
iii	Visual (Welds)	As per Code/Spec.	Weld Profile	Specs.	W	R
iv	PWHT	AS Per Drg.			w	R
v	HARDNESS	AS Per Drg.			w	R
vi	UT(as applicable)	As  per drg.	Weld Defects	Conf. to Specs.	w	w
ix	NOZZLE RAINFORCEMENTT PAD	Pneumatic test.	Weld Defects	ASME Sec.-IX	w	w
x	CELL TO BOTTOM	Chalk & oil test	Weld Defects	ASME Sec.-IX	w	w
xi	BOTTOM PLATE	Vaccum	Weld Defects	ASME Sec.-IX	w	w
xi	HYDRO TEST	WATER	Weld Defects		w	w
4	PAINTING .
I	SURFACE CLEANING	ASME Sec,viii&b31.3	Surface Finish		w	R
II	PRIMER APPLICATION	ASME Sec,viii&b31.3	painting thick.as for drg.		W	R
III	FINAL PAINT	ASME Sec,viii&b31.3	painting thick.as for drg.		W	W
IV	FINAL DOCUMENTATION	AS -Built Drawings	Report		W	W
Legend  H=Hold		W=Witness		R=Review
	CONTRACTOR ENGINEER		CLIENT ENGINEER
Signature	-		Signature
Name	-		Name